Electrical Switchboard Rubber Mat - RM350.00

Our Switchboard matting / high voltage insulation rubber was tested according to TNB technical specification :

A) ( IEC 61111:2009 ) BS EN 61111 Clause 5.6.4.3 , Voltage Withstand Test

Product Characteristic :-

1) Material : NATURAL RUBBER ( NR ) BASE POLYMER

2) Model / Brand Name : GS-SMG , Withstood 40kV ( Class 3 ) , 5mm Nominal Thickness , GREY Colour with TNBR QATS Test Certificate No. : ( BS EN 61111 : 2009 Clause 5.6.4.3 )

3) Surface finishing : with anti slip Corrugated / Diamond plate surface to provide safe working
4) Specific gravity : 1.50 g/cm³
5) Hardness : 60 ± 5 Shore A
6) Elongation : Min 250 %
7) Tensile Strength : Min 5 MPa
8) OUR available Dimension :
* I) Material Type : Natural Rubber ( NR ) base polymer with anti slip diamond plate
BS EN 61111 : 2009 Class 3 ( Withstood 40kV ) , GS-SMG
A) 5mm Tk x 1,000mm (1 m ) Width x 6,000mm ( 6 m ) Length / roll ( ~ 36kgs / pc )


( * SUBJECT TO AVAILABLE STOCK LEVEL ) .

with anti-slip design on top surface :
Corrugated / Diamond plate high voltage insulation rubber mat

10) Scope , Usage & Application :-
High Voltage Insulation Rubber Mats / Non Conductive Mats - Most commonly called Switchboard matting, these non-conductive mats insulate workers, protecting from deadly shocks generated by high voltage equipment.
High Voltage Insulation Rubber mats are NORMALLY used as floor covering around electrical panels such as Power Transformer Rooms , Sub-Station , High Voltage Panels , LT & HT Labs, Control Panels etc , act as a safety pre-cautious for workers from electrical shock whether they are involved directly in electricity generation, transmission, distribution or its use.
Eventually , the High Voltage Insulation Rubber Mats need to be tested ( with proven data from LOCAL or international accredited testing body ) before being place at electrical generator rooms .

Contact Sales : 016 2555632